FH-3050-10 |
Controller Type |
BOX type |
Parallel IO |
NPN/PNP (common) |
Main |
Operation |
Standard |
Yes |
Functions |
Mode |
Double Speed Multi-input |
Yes |
|
|
Non-stop adjustment mode |
Yes |
|
|
Multi-line random-trigger mode |
Yes (Maximum 8 lines) |
|
Parallel Processing |
Yes |
|
Number of Connectable Camera |
4 |
|
Supported |
FH-S series camera |
All of the FH-S series cameras |
|
|
Camera |
are connectable. |
|
|
|
|
|
|
|
FZ-S series camera |
All of the FZ-S series cameras are connectable. |
|
Camera I/F |
OMRON I/F |
|
Possible Number of Captured Images |
Refer to catalog. |
|
Possible Number of Logging Images to Sensor Controller |
|
Possible Number of Scenes |
128 |
|
Operating |
USB Mouse |
Yes (wired USB and driver is unnecessary type) |
|
on UI |
Touch Panel |
Yes (RS-232C/USB connection: FH-MT12) |
|
Setup |
Create the processing flow using Flow editing. |
|
Language |
Japanese, English, Simplified Chinese, Traditional Chinese, Korean, German, French, Spanish, Italian |
External |
Serial Communication |
RS-232C × 1 |
Interface |
Ethernet |
Protocol |
Non-procedure (TCP/UDP) |
|
Communication |
I/F |
|
1000BASE-T × 2 |
|
EtherNet/IP Communication |
Ethernet port (transmission rate: 1Gbps) |
|
EtherCAT Communication |
Yes (slave) |
|
Parallel I/O |
• 12 inputs/31 outputs: |
|
• Use 1 Line. |
|
• Operation mode: Except Multi-line random-trigger mode. |
|
• 17 inputs/37 outputs: |
|
• Use 2 Lines. |
|
• Operation mode: Multi-line random-trigger mode. |
|
• 14 inputs/29 outputs: |
|
• Use 3 to 4 Lines. |
|
• Operation mode: Multi-line random-trigger mode. |
|
• 19 inputs/34 outputs: |
|
• Use 5 to 8 Lines. |
|
• Operation mode: Multi-line random-trigger mode. |
|
Encoder Interface |
Input voltage: 5 V ± 5% |
|
Signal: RS-422A LineDriver Level |
|
Phase A/B/Z: 1 MHz |
|
Monitor Interface |
DVI-I output (Analog RGB & DVI-D single link) × 1 |
|
USB I/F |
USB2.0 host × 4 (BUS Power: Port5 V/0.5 A) |
|
SD Card I/F |
SDHC × 1 |
Indicator |
Main |
POWER: Green |
Lamps |
ERROR: Red |
|
RUN: Green |
|
ACCESS: Yellow |
|
Ethernet |
NET RUN1: Green |
|
NET LINK ACK1: Yellow |
|
NET RUN2: Green |
|
NET LINK ACK2: Yellow |
|
SD Card |
SD POWER: Green |
|
SD BUSY: Yellow |
|
EtherCAT |
EtherCAT RUN LED: Green |
|
EtherCAT LINK/ACT IN LED: Green |
|
EtherCAT LINK/ACT OUT LED: Green |
|
EtherCAT ERR LED: Red |
Power-supply voltage |
20.4 VDC to 26.4 VDC |
Current consumption |
When connected to a Controller |
Connected to 2 cameras |
5.4 A max. |
Connected to 4 cameras |
7.0 A max. |
Connected to 8 cameras |
--- |
When not connected to Controller |
Connected to 2 cameras |
4.2 A max. |
Connected to 4 cameras |
4.8 A max. |
Connected to 8 cameras |
--- |
Built-in FAN |
Yes |
Usage |
Ambient temperature range |
Operating: 0°C to 50°C |
Environment |
Storage: -20 to +65°C (with no icing or condensation) |
|
Ambient humidity range |
Operating:35 to 85%RH |
|
Storage: 35 to 85%RH (with no condensation) |
|
Ambient atmosphere |
No corrosive gases |
|
Vibration tolerance |
Oscillation frequency: 10 to 150 Hz |
|
Half amplitude: 0.1 mm |
|
Acceleration: 15 m/s2 |
|
Sweep time: 8 minute/count |
|
Sweep count: 10 |
|
Vibration direction: up and down/front and behind/left and right |
|
Shock resistance |
Impact force: 150 m/s2 |
|
Test direction: up and down/front and behind/left and right |
|
Noise |
Fast Transient |
• DC power |
|
immunity |
Burst |
Direct infusion: 2kV, Pulse rising: 5ns, Pulse width: 50ns, |
|
|
|
Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min |
|
|
|
• I/O line |
|
|
|
Direct infusion: 1kV, Pulse rising: 5ns, Pulse width: 50ns, |
|
|
|
Burst continuation time: 15ms/0.75ms, Period: 300ms, Application time: 1 min |
|
Grounding |
Type D grounding (100 Ω or less grounding resistance) *2 |
External Features |
Dimensions |
190 mm × 115 mm × 182.5 mm |
Note Height: Including the rubber feet at the base. |
Weight |
Approx. 3.4 kg |
Degree of protection |
IEC60529 IP20 |
Case material |
Cover: zinc-plated steel plate |
Side plate: aluminum (A6063) |
Accessories |
Instruction Sheet (Japanese and English): |
1, Instruction Installation Manual for FH series:1, |
General Compliance Information and Instructions for EU: |
1, Power source(FH-XCN): 1 (male), |
Ferrite core for camera cable: |
2(FH-3050, FH-1050), 4(FH-3050-10, FH-1050-10), 8(FH-3050-20, FH-1050-20) |
{{commentItem['name'] }}
{{itemReply['name'] }}
Quản trị viên
{{itemReply['created_at'] }}